Authorised Injecta dealer · Maldives
Dosing Pumps in the Maldives
Genuine Italian Injecta chemical dosing pumps, Fluimac AOD diaphragm pumps for chemical transfer, and PrudeX remote water quality monitoring. Sized, supplied and supported for resorts, RO plants and STPs across the atolls.
0.4–1,200 L/h · Made in Italy
4–1,050 L/min · self-priming
Live pH, ORP and flow alerts
One-year warranty · Lifetime spare parts support · Free pump sizing
PrudeX IoT device with an Injecta Athena PR pump and controllerSee the live demo dashboard
- Authorised Injecta dealer
- Made in Italy
- Fluimac AODD pumps
- PrudeX IoT monitoring
- One-year warranty
- Authorised Injecta dealer
- Made in Italy
- Fluimac AODD pumps
- PrudeX IoT monitoring
- One-year warranty
- Authorised Injecta dealer
- Made in Italy
- Fluimac AODD pumps
- PrudeX IoT monitoring
- One-year warranty
- Authorised Injecta dealer
- Made in Italy
- Fluimac AODD pumps
- PrudeX IoT monitoring
- One-year warranty
Pump range
Find the right chemical dosing pump
Injecta builds a dosing pump and metering pump for every duty, from a single pool to a seawater RO plant. Fluimac AODD pumps handle bulk chemical and sludge transfer. Click any product to open its full datasheet on the manufacturer’s website.
Injecta Athena PR (ATPR)
Featured · pH/ORP control
2.5–110 L/h · up to 20 bar
Dosing pump with a built-in pH/ORP controller and a 4–20 mA output that sends readings to PrudeX. Ideal for pools and drinking water.
Injecta Athena BX (ATBX)
Electromagnetic · Constant flow
2.5–110 L/h · up to 20 bar
Simple constant-flow dosing pump for chlorine, acid and antiscalant, with dual manual flow adjustment. Pair it with an NX2000 for online monitoring.
Injecta Atlanta series
Digital · Motor-driven
1.5–1,000 L/h · up to 20 bar
Digital electromechanical pumps with diaphragm (TM) or piston (TP15/TP25) heads, mA/V proportional control and Modbus RS485.
Injecta Taurus series
Piston & diaphragm
Up to 1,200 L/h · up to 20 bar
TP15/TP25 piston pumps (1.5–1,000 L/h) and leak-free TM diaphragm pumps (5.5–1,200 L/h) for large RO, desalination and STP dosing.
Injecta Nike series
Peristaltic
0.4–15 L/h · pulse-free
No valves to scale or lose prime. Nike Step adds mA, ppm and batch modes, pH/ORP (PR) and cooling tower (CT) versions.
Fluimac AODD pumps
Transfer · Air operated
4–1,050 L/min · self-priming
Phoenix double diaphragm pumps for chemical unloading, sludge and dirty water, in PP, PVDF, aluminium or stainless steel.
Injecta Athena PR · Made in Italy
pH 0–14ORP ±999 mV4–20 mA outputIP65
2.5–110
L/h flow range
L/h flow range
20 bar
max pressure
max pressure
5 years
diaphragm guarantee
diaphragm guarantee
Featured pump · Injecta Athena series
Injecta Athena PR (ATPR): dosing pump with built-in pH/ORP control
A digital electromagnetic dosing pump with its own pH and Redox (ORP) controller. It measures the water and doses to hold the set point, so you don’t need a separate controller.
- Built-in controller: pH 0–14 or ORP −999 to +999 mV, with optional automatic temperature compensation
- 4–20 mA output: retransmits the reading so PrudeX can show it online
- Easy calibration: manual or automatic, with a probe efficiency indicator
- Chemical-resistant: PVDF head, ceramic balls, PTFE diaphragm with a 5-year Injecta guarantee
- Built for island plant rooms: stabilised 100–240 V AC supply, IP65 protection
- Alarms: power-on LED, level alarm and level probe input
Athena PR: 2.5–110 L/h, 0.1–20 bar depending on model. Installation kit included.
Best for: commercial swimming pools, drinking water and wastewater treatment. For simple constant-flow dosing, such as antiscalant on an RO plant, the Athena BX (ATBX) ↗ is the lower-cost option. It has no analog output, so pair it with an NX2000 controller for online monitoring.
Injecta · Made in Italy
The full Injecta dosing pump range
As the authorised Injecta dealer for the Maldives and Sri Lanka, we supply genuine pumps with manufacturer warranty and spare parts. Figures are from the Injecta Water Treatment Catalogue 2026.
Bigger plants: Injecta TMP and Power series pumps reach 1,000 L/h and 40 bar. Ask us for sizing.
1. Chemical
What you’re dosing, e.g. 10% hypochlorite
What you’re dosing, e.g. 10% hypochlorite
2. Dose
L/h or ppm, and the water flow it goes into
L/h or ppm, and the water flow it goes into
3. Pressure
Line pressure at the injection point, in bar
Line pressure at the injection point, in bar
4. Control
Constant, or following a meter or controller
Constant, or following a meter or controller
Send us these four details and our engineers will pick the right model. Get a sizing quote →
Applications
Dosing pump applications in the Maldives
Which pump suits each job, and what PrudeX adds when you want to watch it remotely.
PrudeX · IoT water quality monitoring
Watch every dosing system from Malé, or from your phone
PrudeX is our real-time water and wastewater monitoring platform. Sensors at each plant room stream readings to one cloud dashboard, so a resort group can see every island’s pools, RO plants and STPs without sending an engineer by boat.
- pH
- ORP
- Conductivity
- Flow
- Dissolved oxygen
- COD · BOD · TSS
Live alerts by role
Thresholds trigger alerts to the right person, with time-based escalation if nobody responds.
Multi-site dashboard
One login for every island and plant. Scale from one site to many on the same platform.
Audit-ready reports
24-hour, 7-day and 30-day trends and exports for management reviews and audits.
Cloud and mobile
Secure access from desktop, tablet or phone, with role-based permissions.
API and SCADA integration
Connect PrudeX to your existing SCADA, ERP or analytics tools.
Works with Athena PR and NX2000
PrudeX reads their 4–20 mA output, so you see the same readings that drive your dosing and catch drift early.
How online monitoring connects: 4–20 mA to PrudeX
1 →
pH / ORP probe
In the pool or plant line
pH / ORP probe
In the pool or plant line
2 →
Injecta Athena PR pump
Measures the water and doses to hold the set point
Injecta Athena PR pump
Measures the water and doses to hold the set point
3 →
4–20 mA output
Reading sent from the pump
4–20 mA output
Reading sent from the pump
4
PrudeX cloud
Dashboard, trends and alerts on your phone
PrudeX cloud
Dashboard, trends and alerts on your phone
Using constant-flow ATBX pumps? Add an NX2000 controller. It switches the pump through its relay and sends the same 4–20 mA signal to PrudeX.
01
Site survey
Map sampling points, risks and reporting needs.
Site survey
Map sampling points, risks and reporting needs.
02
Install
Fit sensors and gateway, validate communications.
Install
Fit sensors and gateway, validate communications.
03
Configure
Set thresholds, alert escalation and user roles.
Configure
Set thresholds, alert escalation and user roles.
04
Commission
Live validation and operator training.
Commission
Live validation and operator training.
Complete the system
Automatic dosing control, on site and remote
Pair your pumps with a controller so they dose only when the water needs it, and with PrudeX so you can see it working from anywhere.
Injecta · on-site control
Injecta Nexus 2000 (NX2000) controller
For constant-flow pumps such as the ATBX. It measures pH, ORP, conductivity or temperature and uses two set-point relays to switch your dosing pumps. Its galvanically isolated 4–20 mA output is proportional to the reading, and that is what feeds PrudeX.
- Ranges: pH 0–14, ORP ±1,500 mV, conductivity 0–200 mS, 0–100 °C
- Mounting: IP65 wall box, panel or DIN rail
- Power: 100–240 V AC or 24 V
Prudence · remote monitoring
PrudeX dashboard and alerts
Reads the 4–20 mA signal from an Athena PR or NX2000 and shows live readings, alerts and 30-day trends for every plant room on your phone.
Fluimac Phoenix · Made in Italy
Fluimac AODD diaphragm pumps for chemical transfer
Air operated double diaphragm (AOD / AODD) pumps move acids, alkalis, sludge and liquids with solids, up to 50,000 cps viscosity. They run on compressed air, with no electric motor and no mechanical seal at the pump.
- Self-priming: dry suction lift up to 5 m
- Runs dry without damage, thanks to the seal-less design
- Dead-head safe: stalls safely against a closed valve
- Passes solids: sludge, slurry and dirty water
- Oil-free air: anti-stall air valve needs no lubrication
Best for: unloading chemical drums and IBCs, STP sludge and filter press feed, RO cleaning (CIP) and sump transfer.
Fluimac Phoenix range · Made in Italy
PolypropylenePVDFAluminiumStainless steel
13
sizes, P4 to P1000
sizes, P4 to P1000
1,050
L/min max flow
L/min max flow
5 m
dry suction lift
dry suction lift
Phoenix Standard range: 13 sizes, 4 to 1,050 L/min
Click a model to open its datasheet and performance curves on fluimac.com in a new tab.
Polypropylene (PP)
Acids, alkalis and most water treatment chemicals
Acids, alkalis and most water treatment chemicals
PVDF
Strong acids, hypochlorite and aggressive solvents
Strong acids, hypochlorite and aggressive solvents
Aluminium
Oils, paints and non-corrosive liquids
Oils, paints and non-corrosive liquids
Stainless steel
Food, hygiene and higher-temperature duties
Food, hygiene and higher-temperature duties
Other Phoenix versions
Phoenix ATEX
For potentially explosive atmospheres, e.g. fuel and solvent transfer
Phoenix Flap
Flap valves for sumps, dewatering and liquids with large solids
Phoenix Steel
Stainless steel centre block for hygienic, hot or cold duties
Phoenix Food
Built to food-industry standards for resort kitchens and F&B
Phoenix Accurate
Remote-controlled pumps for precise, dosing-type duties
Why buy from us
Pumps that keep running, even on remote islands
Genuine pumps
Authorised Injecta dealer: no grey imports, full manufacturer warranty.
Spares on hand
Lifetime spare parts support, so a worn diaphragm doesn't mean weeks of downtime.
Right size first time
Our engineers size each pump to your chemical, dose and pressure.
Monitored remotely
Add PrudeX and we can see a problem before your team calls us.
FAQ
Dosing pump questions
Are you an authorised Injecta dealer in the Maldives?
Yes. We are authorised dealers for Injecta (Italy) in the Maldives and Sri Lanka, so you get genuine pumps, full warranty and spare parts.
What is a dosing pump?
A dosing pump, also called a metering pump, injects a precise, adjustable amount of chemical into water or a process line. Typical uses are chlorination, pH correction and antiscalant dosing.
How do I choose the right dosing pump?
We need four things: the chemical, the dose in L/h or ppm, the line pressure, and how you want to control it. Send them on WhatsApp and we’ll recommend a model.
Which chemicals can the Athena pumps dose?
The Athena PR and Athena BX have a PVDF head, PTFE diaphragm and ceramic balls, so they handle most water treatment chemicals, including sodium hypochlorite, acids and antiscalants. Tell us your chemical and we’ll confirm.
Which Injecta products can send data to PrudeX?
The Athena PR pump and the Nexus 2000 (NX2000) controller both have a 4–20 mA output that PrudeX reads, so your pH or ORP readings and alarms are available online. The Athena BX (ATBX) has no analog output, so pair it with an NX2000.
Can I monitor dosing on several islands from one place?
Yes. PrudeX streams pH, ORP, flow and other readings from each site to one cloud dashboard, with alerts to the right person when a value drifts.
What is the difference between a dosing pump and an AODD pump?
A dosing pump injects small, accurate amounts of chemical. An AODD (air operated double diaphragm) pump transfers larger volumes, such as unloading chemicals from drums or moving sludge.
How do you deliver pumps and spares to the islands?
[Stock location, shipping time to Malé, onward delivery to resort islands, service visits.]
What warranty do I get?
One-year warranty on Injecta and Fluimac pumps, plus lifetime spare parts support. The PTFE diaphragms on Athena and Hydra pumps carry a 5-year Injecta guarantee.
Get a dosing pump quote today
Send us your chemical, dose and pressure, and we’ll reply with the right pump and price.
WhatsApp +94 77 392 7630 · [email protected]